Colorado Man Finds He Was Billed for Neighbor's Electricity Meter for 16 Yrs. When Trying to Reduce His Xcel Energy Bill
Jun 04, 2023Poland’s PGE Dystrybucja’s smart meters rollout to get under way
May 29, 2023EEDC introduces mobile metering in Imo
May 15, 2023Virginia Ski Resort Adding New Solar Array To Power Waterpark
May 07, 2023Ukraine Hunts the World for Parts to Fix Crippled Energy Grid
Apr 27, 2023The Snout-Like "PiggyMeter" Is a Home Assistant-Compatible Sensor for Energy Meters and More - Hackster.io
Pseudonymous maker "Aquaticus" has designed a kit to get your energy, water, or other IEC 62056-21-compatible meter talking to Home Assistant or other smart home platforms, dubbed the PiggyMeter — thanks to its snout-like appearance.
"[The PiggyMeter can] read data from an electric meter or any device with a compatible interface," Aquaticus explains of his creation, which communicates with the meter over an IEC 62056-21 connection. "It uses widely available components, open source software, and is compatible with [the] popular home automation software Home Assistant."
The reason for the device's unusual name is the result of its 3D-printed three-part plastic housing, which when assembled looks uncannily like the snout of a pig. It's no comedy design, though: the "snout" is built to mate with the optical interface on compatible meters, providing an isolated connection from which it can safely draw readings.
Inside that snout-like housing is a Lolin Wemos S2 or C2 Mini board, based on the Espressif ESP32-S2 and ESP32-S3 respectively, with 2MB of pseudo-static RAM (PSRAM) and 4MB of flash storage, which runs the ESPHome firmware and its IEC 62056-21 component — providing compatibility with modes A, B, C, and D, but not mode E, and only for meters which provide readings as ASCII-encoded data.
Assuming your meter meets the requirements, the snout connects using a simple magnet which places the custom-built optical interface where it can begin to take readings. There's no battery, but the microcontroller can be powered via its USB Type-C port — and sends its readings to Home Assistant or other compatible smart home platform over Wi-Fi.
Full details on building your own PiggyMeter are available on Acquaticus' website; the maker is also selling a kit with all the required components, bar the meter to be read, on Tindie at $39.99 or $14.99 for just the optical interface board.